Add a belt tip to your belt OR Ship you a Belt Tip.

Description

Dark Victory Armory's Superior Belt Tip
for 1.25" or 1.5" wide leather
Description:
Your choice of  Solid Brass, Nickel Plated Brass, or Engraved Stainless Steel.  All
are very high quality hardware.
Make a purchase from this listing and we'll mount a belt tip to your belt that matches the hardware you've selected.  IF you do not order a belt from us, this will convert over to shipping you a tip suitable for mounting onto a 1 1/4" or 1 1/2" wide leather strap.
These tips have a finished outside width that matches their size so that they can pass easily through a buckle.  So a tapered
1.5" straps will fit the opening while also having an exterior measurement of 1.5".  The measurement in this example is a "nominal" width but the specific dimensions are listed below as hand measured with a caliper.
Installation Instructions:  This style of tip is secured to the tip of a belt using two small set screws (slotted).    Steps are as follows:
1) Remove both screws and set them aside and CAREFULLY keep track of them
2) Using the tip as a template, mark the screw openings onto the back of the strap then punch two small holes to accept the screws.
3) You'll want to taper the end of the belt so that it can fit inside the tip.
4) Slip the tip over the end of the belt to align the screws with the holes you've made and then re-install and tighten them until they are even with the surface of the tip.
Dimension specifics:
1 1/4" solid brass- 19 grams
Outside width: 30 mm
Inside slot width: 28 mm (where you'd insert your leather)
Thickness : 7.25 mm
Inside slot thickness: 5 mm (where you'd insert your leather)
Length: 34.5 mm
1 1/2" solid brass- 24 grams
Outside width: 35.5 mm
Inside slot width: 33.5 mm (where you'd insert your leather)
Thickness : 7.25 mm
Inside slot thickness: 5 mm (where you'd insert your leather)
Length: 34.5 mm
1 1/2" Engraved Stainless - 36 grams
Outside width: 36.25 mm
Inside slot width: 34 mm (where you'd insert your leather)
Thickness : 11.25 mm
Inside slot thickness: 6.75 mm (where you'd insert your leather)
Length: 35.5 mm
*  The Nickel varieties are just slightly thicker due to the finish coat of plating.
Installation tips:
With thinner material, you may want to add a spacer so that the screws can "anvil" against it to be fully tight when screwed flush or below flush.
Using threadlock or any common adhesive on the threads of the screw will create a very secure bond.
We typically use a 2 inch "English V" strap punch but you can also just use a utility razor to create a blunt V tip to good effect.
Darkening the cut edges of the tip cut can create a nice finished look.
Best Regards and Thanks for your Patronage,
Jordan
Chief Armorer
Dark Victory Armory
Notes:
♦ Please be aware that the pictures are representations of our products. There may be variations from piece to piece.
♦ Our fine belts are made entirely with hand tools in our smoke free workshop in Saint Albans, Vermont.
Satisfaction policy:
Your happiness with our products is a top priority. See our feedback and know that this represents our sincere commitment to our customers. Please contact us if you have any problem with what we've sent. The deal's not done till everyone leaves smiling.
Handling time:
We generally ship in just a few days, but we also attend a large event called The Pennsic War that takes us away from the workshop for several weeks every July/August. We continue to accept orders while we are gone and will send orders out within a few days of returning home. Watch for the away message and note the handling time. Please let us know if you are in urgent need by a specific date and we'll do our very best to accommodate your schedule.
We are happy to ship internationally and insurance is included in this rate.
Custom works happily considered for belts, shields or body armor.
For more detail on what we can do visit our Facebook page called Dark Victory Armory or find us on the web.
Best Regards and Thanks for Visiting!
Jordan
Chief Armorer
Dark Victory Armory