2006-13 Chevy Corvette LS7 Z07 7.0L Brand New Rocker Arms w/ Trunion Kit x 16

Description

These are new and on closeouts below cost.
Buy as is.  No warranty, no returns and no refunds
Trying to clear out inventory.
Blowout price
This is for both intake and exhaust sides.  A set of 16
LS7 New Rocker arms with Trunion installed
Fits 2006-13 Z06 Corvette 7.0L
2014-15 Camaro Z28 7.0L
Unlike others selling a service and charging you core charges, these are new rocker arms with the Trunions already installed.
No core charge, no need to send us your original rockers back, etc.
you get everything as pictured
Whether you have a stock LS7 motor or  modified LS7 motor, replacing your rockers with a true roller bearing setup is highly recommended.   The stock bearings have a tenancy to fail.  These rocker arms are a must have for any aggressive heads and cam combo.   However there are many reports in the LS7 forums that aggressive cam setups that have
250 duration area with .650"+ lift break stock rockers.  We cannot warranty these rockers under these parameters as it is a known problem even with a stock rocker arm setup.
This kit includes:
8 NEW Intake  Rocker Arms
8 NEW Exhaust  Rocker Arms
16 rocker arm trunions- LS-type retrofit
32 rocker arm bearings- LS-type retrofit
32 rocker arm retaining rings- LS-type retrofit
Everything already installed and ready to go!
You just have to bolt them on with the factory rocker arm bolts.
Install
the upgraded rocker arms to the cylinder heads using the factory rocker bolts.
Be sure to rotate the trunion so that the
flat recess side of the trunion's center hole faces upward
(the bolts must seat against this recessed flat side of the hole).
Tighten the cap screw to a value of 22 ft-lbs, following the OE
installation procedure.